IDW-2400T MFDC Resistance Welding Power Supply for Heavy-Duty Metal Fabrication & Industrial Manufacturing
The IDW-2400T MFDC resistance welding power supply is a high-performance industrial welding control system designed for demanding resistance spot welding applications. Combining advanced medium frequency inverter technology, high-current output and intelligent welding process management, IDW-2400T delivers stable welding performance, precise current regulation and reliable production quality. It is suitable for heavy metal fabrication, steel structures, wire mesh, metal furniture, electrical components and industrial hardware manufacturing.

With a maximum output current of 2400A and rated power of 350KVA × 2, the IDW-2400T provides powerful welding capacity for industrial production lines. The system operates at a selectable frequency of 1kHz or 4kHz and supports two control modes: constant peak current and constant conduction angle. This flexible control architecture allows engineers to optimize welding parameters according to different materials, workpiece thicknesses and production requirements.
Advanced MFDC Welding Control
The IDW-2400T supports three-stage welding sequences, including preheating, main welding and tempering. Operators can configure welding steps, current reduction and recycling times to achieve suitable welding conditions for different applications.
Real-time secondary current measurement through a toroidal coil provides feedback to the controller for accurate current adjustment. With 0.5% control accuracy, the system helps maintain stable welding parameters and improve process consistency.
Compared with conventional AC resistance welding technology, MFDC inverter technology provides direct current output, fast response and concentrated welding energy. The low-voltage, high-current configuration supports efficient heat generation and reliable welding performance for multilayer metal sheets, thick steel plates and complex metal assemblies.

- Equipped with remote programmer, It can realize external remote program settings.
- One working frequency (1KHz or 4KHz).
- Two control modes (constant peak current or constant conduction angle).
- 3 stages weldings: Preheating, weld, tempering. Regarding welding, you can set the stepping, reducing, and recycling times.
- Free program I/O outlets: Program 3 output, great connection with PLC, robots connection.
- Counting system: Welding qty, production qty, carton qty, electrode repairing qty are all covered. It improves the quality control of welding.
- Communication and BCD code control: It is ok to connect remote control, PLC etc. other remote digital control.
- Secondary toroidal coil displays real on time welding current which gives feedback to controller to adjust the accuracy of current.
- Easy Setting. It is ok to copy the same action data to be another line. It save time to set welding program.
- Limit control: 3 levels management.
- Data management: The current/ welding time/ voltage/ action code are stocked and USB copy to computer to study for quality checking and traceability.
- Alarm saving: The quality issue will be recorded to trace.
- Accuracy: 0.5%.

| Model | IDW-2400T |
| Output Voltage | 3*380V +/-10%, 50/60Hz( Option 220V/440V Available) |
| Rated Power | 350KVA * 2 |
| Maximum Output Current | 0-2400A/0-96KA |
| Inverter Frequency | 1KHZ or 4KHZ |
| Duty Cycle | 50% |
| Control Mode | constant peak current or constant conduction angle |
| Cooling Mode | Water Cooling |
| Communication Mode | RS-232/RS-485 |
| No-load Voltage | 9.8V |
| Valve Output | DC24V, ≤0.15A per channel |
| Solenoid Valve Output | 4 standard; 10 for gantry welders; up to 17 channels |
| Operating Temperature | -5℃ ~ +50℃ |
| Humidity | ≤80%, non-condensing |
| Heating Stage | 3 |
Intelligent Production Management & Automation
The IDW-2400T is equipped with comprehensive production management functions:
- 32 standard welding programs, expandable to 256.
- Three-level welding parameter limit management.
- Real-time welding current and voltage monitoring.
- Welding quantity, production quantity and electrode maintenance counting.
- USB data storage and export for quality traceability.
- Alarm records for welding quality analysis.
- Remote programmer for external parameter settings.
- Three programmable I/O outputs for PLC and robot integration.
- RS-485 standard communication and optional RS-232.
- BCD code control for external program selection.
The controller supports up to 4 standard air valves, with configurations available for gantry welding systems requiring more pneumatic outputs.
Industrial Welding Applications
The IDW-2400T MFDC resistance welding power supply is suitable for a wide range of industrial applications, including:
- Steel structure and metal frame manufacturing.
- Wire mesh and steel wire product welding.
- Metal furniture and storage rack production.
- Electrical cabinets and industrial enclosures.
- Metal hardware and sheet metal fabrication.
- Multilayer steel plate resistance spot welding.
- Automated multihead resistance welding systems.
With powerful output capacity, intelligent welding management and flexible automation integration, IDW-2400T provides a reliable solution for manufacturers requiring high-current resistance welding and consistent industrial production.